Home - Return to Previous Page
Kit consists of 4 MCU (micro cellular urethane) super thin flat bump stop elements that are surplus from our Spec Miata bump stop and shock mount kits Kit contains a combination of two super thin bump stops per shock (8 bump stops total per kit) to create your own combination and 4 M10 washers to replace the OEM NA bump stop mounts. Use both for "somewhat" slammed, or only one for "full slammed" setups Don't sacrifice ride height, but still provide a safety cushion to keep your shock bodies from metal-to-metal contact with the shock hats Designed for Miatas and MX-5's, but can be used on any shocks with a shock shaft diameter of 7/8" or less
5X Racing NA Miata Slammed and Cambered Bump Stop Kits
Slammed Bump Stop Kits
23993600 - 5XR-NA-SLMNCAM
This is a SCREAMIN' deal for all you slammed and cambered scrapers out there! Read more about this in the product info below
Shipping: USPS Priority flat rate envelope unless noted otherwise
Since we're racers and love our suspensions, we always cringe when we see Miatas that are slammed and cambered thinking that they're getting that low by means of omitting the bump stops from their shocks. The reason this would be done is to ensure the ride height is getting as low as possible, and typically the bump stops will be the things keeping a car from going super low. By using these super thin bump stop elements, you can create your own "super slammed" suspension kit that will ensure your shock bodies are not slamming straight into your shock hats, which WILL cause physical damage over time (and produce a downright horrendous ride quality!).
- 23993600 - 5XR-NA-SLMNCAM
- 5X Racing
- Item Requires Shipping
- 1.0 lbs.
- W6.0000” x H0.5000” x L10.0000”
- USPS Priority flat rate envelope unless noted otherwise
Total Reviews (0)
You must login to post a review.
Write the First Review!