Racing Beat MX-5 NC Race Header
NC MX-5 Header
Racing Beat MX-5 NC Race Header
Upgrading your exhaust system with a high efficiency MX-5 exhaust header is a time-proven method to improve the gas flow from your engine. Although modern exhaust manifolds have improved dramatically over the years, and may in fact resemble a traditional header in shape, testing has proven that performance improvements can be obtained with continued refinement of the exhaust manifold design.
The Racing Beat MX-5 exhaust header that we produce was initially developed at the request of Mazda's R&D team for inclusion on an early prototype MX-5 which was to be introduced prior to the general release of the vehicle. This showcase MX-5 and Racing Beat header was displayed at SEMA show and in the Mazda display at various car shows during the introduction phase of the then new 2006 MX-5 NC.
Design and Manufacturing
Manufactured entirely from 304-stainless steel to provide both outstanding durability and a stunning appearance, the Racing Beat 4-to-1 configured header is designed to offer the MX-5 owner noticeable performance gains. Simply put, there isn't a better looking header on the market today! Our exclusive, cast stainless-steel engine-to-header flange features specially designed exhaust ports that transition smoothly from the engine's exhaust port to the primary tubing. Large diameter 1.7" OD tubing has been used for the primary tubing, collecting into a specially configured collector assembly. Exhaust gas exits the header through a genuine Mazda OEM stainless-steel flange, mating to the factory connecting pipe section. The Mazda OE outlet gasket is retained.
Development & Tuning
Developed in-house by Racing Beat, this MX-5 header underwent several on-chassis dyno test tuning sessions to determine specific tubing lengths, collector configurations, and optimum tubing positions. A crititcal area of design and refinement was focused on the exact size and shape of the primary tube collector. For dyno result information,view the attached Dyno results in the attachments tab.
For race applications, combine the Racing Beat header with a race connecting pipe (with presilencer unit) for additional performance. For dyno result information for the header and race connecting pipe section, view the attached Dyno results in the attachments tab.
The installation of a header on a federal or California emissions equipped MX-5 requires the removal of the primary catalytic converter unit. However, the secondary catalytic converter incorporated into the mid-pipe section (aft of the header section) is retained. Since a factory-placed catalytic converter is being removed by the install of this component, this race header is NOT considered emissions legal for street use. Both primary and secondary oxygen sensors are retained and are relocated into the header outlet collector. (Although this configuration will not affect engine performance, it is possible that this configuration will trigger an error code with the OBDII system and illuminate the "check engine light" on the vehicle.) To avoid this from occurring, we offer an optional Race Header Wiring Kit that relocates the secondary oxygen sensor.
Each MX-5 header kit comes complete with detailed installation instructions and an exclusive Racing Beat manufactured OEM-style plug-in electrical extension wire for the repositioning of the primary oxygen sensor. The stock engine-to-header gasket can be reused if there are no visible signs of distress or wear. (Mazda utilizes a heavy-duty metal gasket, which we have found can be reused several times.)
- Item Requires Shipping
- 15.0 lbs.
- W20.0000” x H10.0000” x L40.0000”
- Flat Rate Shipping $100 (does not apply to AK and HI)
Total Reviews (0)
Write the First Review!
You must login to post a review.