Team 5X Racing is our race team, and also the Research and Development side of our business. In addition to retail, we also prototype and test new race parts to add our touch to the racing parts marketplace. Our goal is to figure out what is needed in the grassroots road racing market, figure out an innovative product that is not already out in the market to fulfill the needs of the racing community, prototype and build the part, test in our our race cars, produce the parts, then sell them to you on our website. All done in house, excellent quality, proven on the track and street by us on our own race cars and street based test mules.
Browse NB Miata Bump Stops and Shock Mounting Hardware Products
Items 1-16 of 16
5X Racing 2.5" Coilover Spring Isolator for 99-05 Miata Shock HatsNew
Priced EACH 2" inner diameter Designed to allow a 2.5" race spring to interface into a 99-05 Miata OEM shock hat. This is for the purpose of creating your own coilover kit using a Bilstein shock...
5X Racing 36mm Bump Stop Kits for 1999-2005 MiataNew
We understand bump stop selection can be confusing, but our collaboration with Fat Cat Motorsports has allowed us to put together unique bump stop kits that are sure to fill the needs of every Mi...
5X Racing Coilover Shock Mount System for NB Mazda MiataNew
Based off the Spec Miata race proven Fat Cat Motorsports shock mount kit, this system is designed to completely transform the lackluster factory rubber shock mounting solution to maximize handling...
Forget OEM replacement bump stops that will crumble and disintegrate with age, and replace them with our superior 58mm Red Bump Stops for your 1999-2005 Miata! 58mm/2.250 in. Height (Slightly shor...
We're VERY HAPPY to have this kit finally available! Read the details in the extended description below! Kit will replace your entire original rubber NB shock mount bushings and washers, providin...
5X Racing NB Miata Shock Bushing Upgrade Kit - KoniNew
NOTE: This kit only works with KONI shocks! Koni shocks use an M12 top nut, all others use an M10. Read the additional details in the extended description below! Kit will replace your entire or...
5X Racing NB Miata Slammed and Cambered Bump Stop KitsNew
This is a SCREAMIN' deal for all you slammed and cambered scrapers out there! Read more about this in the product info below NB Kit consists of 8 MCU (micro cellular urethane) super thin flat bu...
Based off the Spec Miata race proven Fat Cat Motorsports shock mount kit, this system is designed to both facilitate the mounting of the shorter 90-97 Miata shocks to 99-05 Miata OEM shock hats (i...
5X Racing Spec Miata 2.5" Coilover Spring IsolatorNew
THE ONLY LEGAL SPRING ISOLATOR FOR SPEC MIATA! There are imitation isolators being sold by another company without full disclosure that they are NOT the spec part, please be aware that using this ...
5X Racing Sport Bump Stop Kits for 1999-2005 MiataNew
Our Sport kits are the evolution of the legendary Fat Cat Motorsports "Sport" Bump Stop kits. Instead of using the cutoff lower portion of the 76mm Blue bump stops to create the 36mm front bump st...
5X Racing Stock Class Autocross Bump Stop Kit for MiataNew
Stock/Street class SCCA Autocross rules specify the use of stock springs, but do allow shock and bump stop changes. However, the bump stops do not engage earlier than on the factory setup. Installi...
5X Racing Street Bump Stop Kit for 1999-2005 Mazda MiataNew
Our Street Kit is recommended for cars at stock ride height/stock springs or slightly lowered. A good choice for street/mild sport applications where daily driving is the primary use of the car, or...
Priced EACH Will NOT fit 1990-1997 NA Miata Shocks! Those are found here Allows 99-05 NB shocks to be upgraded with our superior MCU shock bushings and the ability to create your own NB shoc...
Priced EACH Will NOT fit 1990-1997 NA Miata Shocks! Those are found here Allows 99-05 NB Koni Sport shocks to be upgraded with our superior MCU shock bushings and the ability to create your ...
Heavy Duty M14 ID x 50mm OD Washer that we use in our Miata shock mount/bump stop kits. This is the top washer in the shock mount kits that goes under the shoulder nut
Urethane Spring Riser for 99-05 Miata Shock MountsNew
Priced EACH! These spring risers are made to offset the lowering from substituting an NB mount in place of an NA mount with the same spring length. When upgrading from OEM NA to NB shock mounts...