5X Racing Coilover Sleeve and Collar for Bilstein ShocksNew
This version of coilover sleeve for Bilstein shocks is a bit taller than the Spec Miata coilover sleeves we also sell. These are better for the taller 8" springs that we configure some of our Bils...
5X Racing NA Miata Create-Your-Own DIY Coilover KitNew
Have it your way and build your own custom Bilstein-based Miata coilover kit! If you have a specific spring rate and length combo you want to use that is not offered within one of our pre-configure...
5X Racing NB Miata Create-Your-Own DIY Coilover KitNew
Have it your way and build your own custom Bilstein-based Miata coilover kit! If you have a specific spring rate and length combo you want to use that is not offered within one of our pre-configure...
5X Racing NB Miata DIY Dual-Purpose Coilover KitNew
Build your own Bilstein based coilovers with us! This is our "Dual-Purpose" kit that uses 8" long front springs and 8" long rear springs. This allows for higher ride heights and softer spring rate...
Build your own Bilstein based coilovers with us! This is our "Race" kit that uses 6" long front springs and 7" long rear springs. This mimics the Spec Miata kit, but with more ideal spring rates th...
5X Racing NB Miata DIY Sport Touring Coilover KitNew
Our hand picked Bilstein based coilover kit was created using the research and expertise of Fat Cat Motorsports to achieve the perfect "flat ride"! The kit is sold in individual piece form for th...
5X Racing NB Miata DIY Street Touring Coilover KitNew
Our hand picked Bilstein based coilover kit was created using the research and expertise of Fat Cat Motorsports to achieve the perfect "flat ride"! The kit is sold in individual piece form for th...
Our hand picked Bilstein based coilover kit was created using the research and expertise of Fat Cat Motorsports to achieve the perfect "flat ride"! The kit is sold in individual piece form for th...
Fits all 1999-2005 Mazda Miata. Will fit 1990-1997 Miata, but will raise vehicle height due to longer shock body OEM replacement for special "hard s" and "sport" editions Use the shorter stroked "...
Fits all 1999-2005 Mazda Miata. Will fit 1990-1997 Miata, but will raise vehicle height due to longer shock body "Performance Plus" version with shorter stroke than OEM Bilstein B6 for lowered Mia...
Fit's all 1999-2005 NB Mazda Miata's. Do NOT use these on 1990-1997 NA Miata's! They are too long and your ride height will be way too high! Estimated Spring Rates: Front (progressive) 240-270 lb...
Koni Sport Adjustable Front Shock for 1999-2005 Mazda MiataNew
Priced EACH! NOTE: Koni shock shafts are thicker than the OEM shock shafts, so you'll need to accommodate these shocks by drilling the shock mounts larger
Adjustable dampening
Koni Sport Adjustable Rear Shock for 1999-2005 Mazda MiataNew
Priced EACH! NOTE: Koni shock shafts are thicker than the OEM shock shafts, so you'll need to accommodate these shocks by drilling the shock mounts larger Adjustable dampening
These are take-off parts from our coilover builds. They're the spring perches Bilstein includes with their shocks to provide the lower spring perch for the NB Miata springs. These will NOT fit the ...
