Additional Images

5X Racing NA Miata DIY Race Coilover Kit

DIY Miata Race Coilover Kit

SKU: 23993459 - 5XR-NA-DIYCOK-R

Build your own Bilstein based coilovers with us! This is our "Race" kit that uses 6" long front springs and 7" long rear springs. This mimics the Spec Miata kit, but with more ideal spring rates that are better balanced. This is geared for cars that are trailered to the event and are not normally street driven due to the extremely low ride heights that are achievable. The kit is sold in individual piece form for the true DIY'ers out there that enjoy building their own stuff, or in pre-assembled bolt-in ready form for an additional $200 (cost includes brand new OEM NB shock hats) by selecting the option using the drop-down menu.

Check out the info below for all of the details

Shipping: Not eligible for Free Shipping. UPS Ground Standard

Pricing: $1,290.00

Description
Video Overview
Video Instructions
Details
Shipping
Reviews

Description

Kit includes:

qty 2 of 24-014885 Bilstein HD NA Miata Front shocks
qty 2 of 24-014892 Bilstein HD NA Miata rear shocks
- NOTE! We always recommend the NA Miata Bilstein HD's for coilover creation as the shock bodies on the NA shocks are shorter, which provides more shock travel and better suit a lowered suspension setting considering you're going to lose shock travel with the lowering. You can most definitely use the NA Miata Bilstein shocks on an NB if they are configured with our 5XR shock mount system, which interfaces the NA shock with the OEM NB shock mount. This is all included in this kit, so if you have an NB and want track-weapon coilovers, go with the NA Bilsteins in this kit!
qty 2 of 6" length 600in/lb Front Eibach race springs
qty 2 of 7" length 450in/lb Rear Eibach race springs
qty 1 of 5X Racing coilover sleeve and perch kit
qty 1 of 5X Racing coilover shock mount kit (shock mounting hardware and spring isolator)
qty 4 of OEM 1999-2005 NB Miata shock hats
qty 4 of 5X Racing 36mm Black (hard) Bump Stops

If you're not sure on how to assemble this kit - or just want to make it easier on yourself - you can select the option to have us pre-assemble the coilover kit for you. Here is what you get and what we do for our special $100 pre-assembly option:

We prep the surface of the shock hat in which the Fat Cat spring isolator gets glued to. We also prep the surface of the isolator as it is very slick and can become separated from the shock hat if not made to adhere better. This ensures the isolator stays in position and does not separate over time
We then use a slight bead of silicone to seat the coilover sleeves to eliminate having them turn when you adjust your spring heights after they're installed
We properly install the 5X Racing Shock Mount Kit
Video instructions available for this kit on our YouTube channel or in the "Video Instructions" tab above