Team 5X Racing is our race team, and also the Research and Development side of our business. In addition to retail, we also prototype and test new race parts to add our touch to the racing parts marketplace. Our goal is to figure out what is needed in the grassroots road racing market, figure out an innovative product that is not already out in the market to fulfill the needs of the racing community, prototype and build the part, test in our our race cars, produce the parts, then sell them to you on our website. All done in house, excellent quality, proven on the track and street by us on our own race cars and street based test mules.
5X Racing Stock Class Autocross Bump Stop Kit for MiataNew
Stock/Street class SCCA Autocross rules specify the use of stock springs, but do allow shock and bump stop changes. However, the bump stops do not engage earlier than on the factory setup. Installi...
5X Racing Street Bump Stop Kit for 1990-1997 Mazda MiataNew
A must-have with any shock/spring upgrade. Our kits are an integrated package (not just a part) and are designed for your particular setup, including washers and spacers (when needed, to limit trav...
5X Racing Street Bump Stop Kit for 1999-2005 Mazda MiataNew
Our Street Kit is recommended for cars at stock ride height/stock springs or slightly lowered. A good choice for street/mild sport applications where daily driving is the primary use of the car, or...
NOTE: Rear tow hook mounts on passenger side, inboard tow hook mounting location ONLY! This also may interfere with stock exhausts, or some aftermarket exhausts. Constructed of sturdy .1875 inch th...
Fits 1999-2005 Miata Front hook is a direct replacement for the OEM hook, rear hook bolts onto and works in conjunction with the OEM hook allowing you to keep it as a tie down point. Constructed o...
If you don't have a favorite "track hat" and don't already own a Richardson 112 trucker snapback hat, you're missing out! Quite possibly one of the best hats ever made, as far as 5X owner John is c...
An alternative take on shift knobs for your Miata! We take an awesome ODI Vans edition lock-on mountain bike grip and turn it into a shift knob for your Miata! 14 ounce total weight Special in-hous...
5X Racing Wheel Stud Track Packs for Mazda MiataNew
The 5X Racing Wheel Stud Track Pack is designed to provide you with the necessary parts to convert your Miata's wheel studs into track mode. This is what we use on our race cars. It works, it's st...
Priced EACH Special custom USA made Anodized M10 Red Aluminum Washer used in our shock mount/bump stop kits. This is the washer that goes in between the bump stop and lower shock bushing. These h...
Clutch Hydraulic System Refresh Pack for Mazda MiataNew
Kit includes: Exedy Clutch Slave Cylinder 5X Racing Extended Length (firewall to slave) or Full Length (master to slave) Clutch Line Exedy Clutch Master Cylinder All of these components are avail...
If you're here, you've most likely been instructed to purchase this product from one of us. This is used for us to capture your credit card info, order, and address so we can process your order in ...
This kit incorporates all of the features you would look for in a test port and drain kit, such as: No Fuel Spillage
when connecting or disconnecting Very high flow empties tank the fastest Plug i...
We manufactured these special Koni adjustment knob extensions to allow easy shock adjustment using the plastic Koni adjustment knobs that come with Koni Sport Yellow adjustable shocks.
When our...
Priced EACH This is our custom USA made lower shock mount bushing. It is constructed out of the same material as our 76mm White (Medium) bump stops. It is used in our shock mount/bump stop kits ...
Priced EACH Will NOT fit 1999-2005 NB Miata Shocks! The shank and threaded portion of the shock shaft is too long for proper thread engagement. Those are found here Designed to fasten 99-05 ...
Priced EACH Will NOT fit 1990-1997 NA Miata Shocks! Those are found here Allows 99-05 NB shocks to be upgraded with our superior MCU shock bushings and the ability to create your own NB shoc...
Priced EACH These are custom USA made steel spacers or "collars" that come in the Bilstein HD Miata shock kits when purchased new. They're required to be used with our shock mount/bump stop kit...
Priced EACH Will NOT work with 1999-2005 NB Miata Shocks! The shank and threaded portion of the shock shaft is too long for proper thread engagement. Those are found here Designed to fasten ...
Priced EACH Will NOT fit 1990-1997 NA Miata Shocks! Those are found here Allows 99-05 NB Koni Sport shocks to be upgraded with our superior MCU shock bushings and the ability to create your ...
Heavy Duty M14 ID x 50mm OD Washer that we use in our Miata shock mount/bump stop kits. This is the top washer in the shock mount kits that goes under the shoulder nut
Replacement Washers for 90-97 Miata Bump Stop KitsNew
PRICED EACH! These are the washers used in our 1990-1997 Mazda Miata bump stop kits. All of our 90-97 kits use four washers to integrate them with the 90-97 shock hats and come packaged with tho...
These SCCA approved safety brackets are the result of rear brake caliper failures at tracks such as Road America. The purpose for this new bracket is to prevent the dangerous and unexpected loss of...
Priced EACH This is our custom USA made upper shock mount bushing. It is constructed out of the same material as our 76mm White (Medium) bump stops. It is used in our shock mount/bump stop kits ...
Urethane Spring Riser for 99-05 Miata Shock MountsNew
Priced EACH! These spring risers are made to offset the lowering from substituting an NB mount in place of an NA mount with the same spring length. When upgrading from OEM NA to NB shock mounts...
