Forget OEM replacement bump stops that will crumble and disintegrate with age, and replace them with our superior 58mm Red Bump Stops for your 1999-2005 Miata! 58mm/2.250 in. Height (Slightly shor...
Mazda OEM 90-05 Miata Rear Lower Control Arm Bushing - InnerNew
Sold individually - Choose a quantity of 2 to replace both inner bushings on one side, quantity 4 to replace all inner bushings on both rear control arms Fits all 90-05 Mazda Miatas Bushing from t...
Mazda OEM 90-05 Miata Rear Upper Control Arm BushingNew
Sold individually (3 bushings total will replace one control arm and the bushing on the spindle. 2 bushings will replace the bushings in the control arm only) Fits all 90-05 Mazda Miatas Replaces ...
Located beneth the front spindle, bolted into the outermost part of the lower a-arm Fits: 1990-2005 Miata Quantity of "2" is needed to replace both front ball joints Both sides are the same from l...
Genuine OEM Mazda Part. We also sell a complete kit with all of the rubber bits needed to replenish your NB shock mounts here: OEM NB MIATA SHOCK MOUNT RUBBER REBUILD KIT
Mazda OEM NB Miata Shock Mount Rubber Rebuild KitNew
This kit is meant to replace the rubber bits that are installed in between the shock hats on 1999-2005 Mazda Miatas and includes: QTY 4 Upper mount bushings QTY 4 lower mount bushings
Genuine OEM Mazda Part. We also sell a complete kit with all of the rubber bits needed to replenish your NB shock mounts here: OEM NB MIATA SHOCK MOUNT RUBBER REBUILD KIT
Mazda OEM NB Miata Upper Shock Retaining WasherNew
Genuine OEM Mazda Part. This is the washer that is on the top-side of the shock assembly as seen from under the hood or trunk. This washer squeezes down on the upper shock mount rubber bushing
Mazda OEM Rear Upper Control Arm Bolt Set for 1999-2005 MiataNew
PRICE IS FOR ONE SET which consists of: 1 - FD01-28-116 Control Arm Bolt 1 - 8871-34-222 Control Arm Bolt Nut These bolts are used on the 1999-2005 Miata Rear Upper Control Arms. There are thre...
Genuine OEM Mazda Part. Not reproduction "spring sheet rubber" that installs underneath the springs on 1999-2005 Mazda Miatas Price is for one. Each shock has one of these, and you would need 4 to...
Mazda OEM Upper Shock Mounts for 1999-2005 MiataNew
The price listed is for ONE mount, with no hardware. Choose a quantity of "4" for an entire vehicle set Will lower NA Miata's (90-97) about 3/4" when replacing original NA mounts Using an NB mou...
