5X Racing Spec Miata Coilover Kit

Kit includes:

• qty 2 of 24-014885 Bilstein HD Front shocks
• qty 2 of 24-014892 Bilstein HD rear shocks
• qty 2 of 6" 700 in/lb Front Eibach race springs
• qty 2 of 7" 325 in/lb Eibach race springs
• qty 1 of 5X Racing coilover sleeve and perch kit
• qty 1 of genuine Fat Cat Motorsports shock mount kit
• qty 4 of OEM 1999-2005 NB Miata shock hats

If you're not sure on how to assemble this kit - or just want to make it easier on yourself - you can select the option to have us pre-assemble the coilover kit for you. Here is what you get and what we do for our special $100 pre-assembly option:

• We prep the surface of the shock hat in which the Fat Cat spring isolator gets glued to. We also prep the surface of the isolator as it is very slick and can become separated from the shock hat if not made to adhere better. This ensures the isolator stays in position and does not separate over time
• We then use a slight bead of silicone to seat the coilover sleeves to eliminate having them turn when you adjust your spring heights after they're installed
• We properly install the Fat Cat Bump Stop kit (assembly order is important to the rules)
• We will set the spring adjustments to match the ride height of our current setup on our race cars. This should be used as a guideline and we recommend you scale and balance the car regardless of our settings. Our base settings are meant to be a starting point
• Shocks will be labeled to their specific corner, and shipped as a "bolt in" installation