5X Racing Coilover Shock Mount System for NB Mazda MiataNew
Based off the Spec Miata race proven Fat Cat Motorsports shock mount kit, this system is designed to completely transform the lackluster factory rubber shock mounting solution to maximize handling...
Sold Individually 3mm thick deburred black acetal plastic made in the USA to our specs Designed to be placed on the shock shaft and underneath the bump stop Used to control shock travel to avoid s...
Based off the Spec Miata race proven Fat Cat Motorsports shock mount kit, this system is designed to both facilitate the mounting of the shorter 90-97 Miata shocks to 99-05 Miata OEM shock hats (i...
PRICE IS FOR A FULL ENGINE RING SET TO EQUIP ALL 4 PISTONS. Each individual ring "set" consists of 3 rings (Two compression and one oil) and are normally sold separately from Supertech (in 3 rin...
PRICE IS FOR A FULL ENGINE RING SET TO EQUIP ALL 4 PISTONS. Each individual ring "set" consists of 3 rings (Two compression and one oil) and are normally sold separately from Supertech (in 3 rin...
Please read all of the information regarding the choices of pistons below. There are many varieties and specs regarding choosing the appropriate piston for your application. We suggest working wi...
Did you know the Mazdaspeed 3 corners on the front bump stops, causing understeer? The factory front stops are much firmer than the rear and engage less than 1/2" from stock height. This increases...
Bump stop kit works with: Mini Cooper, Cooper S (ALL years) Designed for stock or aftermarket struts/shocks and stock or lowering springs Our bump stops are designed to linearize the car's handl...
Priced EACH Will NOT work with 1999-2005 NB Miata Shocks! The shank and threaded portion of the shock shaft is too long for proper thread engagement. Those are found here Designed to fasten ...
5X Racing Spec Miata 2.5" Coilover Spring IsolatorNew
THE ONLY LEGAL SPRING ISOLATOR FOR SPEC MIATA! There are imitation isolators being sold by another company without full disclosure that they are NOT the spec part, please be aware that using this ...
Priced EACH Will NOT fit 1999-2005 NB Miata Shocks! The shank and threaded portion of the shock shaft is too long for proper thread engagement. Those are found here Designed to fasten 99-05 ...
Heavy Duty M14 ID x 50mm OD Washer that we use in our Miata shock mount/bump stop kits. This is the top washer in the shock mount kits that goes under the shoulder nut
Priced EACH Special custom USA made Anodized M10 Red Aluminum Washer used in our shock mount/bump stop kits. This is the washer that goes in between the bump stop and lower shock bushing. These h...
Priced EACH This is our custom USA made upper shock mount bushing. It is constructed out of the same material as our 76mm White (Medium) bump stops. It is used in our shock mount/bump stop kits ...
Priced EACH This is our custom USA made lower shock mount bushing. It is constructed out of the same material as our 76mm White (Medium) bump stops. It is used in our shock mount/bump stop kits ...
Priced EACH These are custom USA made steel spacers or "collars" that come in the Bilstein HD Miata shock kits when purchased new. They're required to be used with our shock mount/bump stop kit...
SOLD INDIVIDUALLY Designed to fit shocks with up to 3/4" (19mm) shafts Great replacement for OEM rubber bump stops on older vehicles Very soft and progressive intial spring rate which will rise...
King XP Race Series Engine Bearing Set for Mazda MiataNew
Our King XP Miata engine bearing set includes a full set of King XP Main Bearings, full set of King XP Connection Rod Bearings, and a set of King Thrust Bearings to give you a complete engine bear...
This is our "Sport" kit and comprises of two 58mm "Red" Bump Stops in front, and two 58mm "White" Bump Stops in the rear. These bump stops are a little shorter than the OEM bump stops and will allo...
Fit's all 1999-2005 NB Mazda Miata's. Do NOT use these on 1990-1997 NA Miata's! They are too long and your ride height will be way too high! Estimated Spring Rates: Front (progressive) 240-270 lb...
Fit's all 1990-1997 NA Mazda Miata's. Do NOT use these on 1999-2005 NB Miata's! They are too short for the NB and your ride height will be way lower than expected! Estimated Spring Rates: Front (...
Fits all 1999-2005 Mazda Miata. Will fit 1990-1997 Miata, but will raise vehicle height due to longer shock body "Performance Plus" version with shorter stroke than OEM Bilstein B6 for lowered Mia...
Walbro Fuel Pump Installation Kit for 1999-2005 Mazda MiataNew
Kit includes rubber hose, washer, hose clamps, filter, and new clip Fits both the 1999-2005 Miata and 2004-2005 MazdaSpeed Miatas Fits both the 190 and 255 lph fuel pumps
Walbro 190 lph fuel pump upgrade package for Mazda MiataNew
Our upgrade package includes a Walbro 190lph fuel pump and install kit of your choice depending on the year of your car. The Walbro 190lph fuel pump replaces the OEM fuel pump. Includes "High press...
Our upgrade package includes a Walbro 255lph fuel pump and install kit for the 90-93 Mazda Miata. The Walbro 255lph fuel pump replaces the OEM fuel pump. Includes "High pressure" Walbro GSS342 fuel...
We manufactured these special Koni adjustment knob extensions to allow easy shock adjustment using the plastic Koni adjustment knobs that come with Koni Sport Yellow adjustable shocks.
When our...
All DIY Autotune products are ordered "fresh" from DIY at the time of order. This ensures you have the most current version of software and updates on the equipment The VVTuner system is a stan...
Priced Individually These are simple flat bump stops that can be used to customize a coilover suspension setup, or add height to an existing setup. Great if you are creating a super-low suspens...
ACT Performance Street Disc Clutch Kit 1990-1993 Mazda MiataNew
Fit's 1990-1993 1.6L Mazda Miata. Can be used on 94-05 1.8L engine as long as the 1.6L flywheel is also used Kit Includes: Heavy Duty Pressure Plate Street Clutch disc Pilot Bearing Throwout Bear...
PRICED INDIVIDUALLY! We make our own coilover systems using these springs. Make your own coilover kits or tune your coilover suspension with these Eibach ERS 6" long, 2.5" Inner diameter race Ma...
CSF 42mm Two Row Racing Radiator for 2006-2014 Mazda MX-5New
Radiator cap INCLUDED Core Size: 21 5/8 x 16 7/16 x 2 1/16 Tank Size: Inlet 17 5/16 x 2 7/16 - Outlet 17 5/16 x 2 7/16 Hose Fitting: Top 1 1/4 left - Bottom 1 1/4 right and 11/16 right Number o...
CSF 42mm Two Row Racing Radiator for 1990-1997 Mazda MiataNew
Radiator cap INCLUDED Core Size: 12 5/8 x 25 3/8 x 1 5/8 Tank Size: Inlet 26 1/16 x 2 3/8 - Outlet 26 1/16 x 2 3/8 Hose Fitting: Top 1 1/4 right - Bottom 1 1/4 left Number of Rows: 2 Material: ...
CSF 42mm Two Row Racing Radiator for 1999-2005 Mazda MiataNew
Radiator cap INCLUDED Core Size: 12 5/8 x 25 3/8 x 1 5/8 Tank Size: Inlet 26 1/16 x 2 3/8 - Outlet 26 1/16 x 2 3/8 Hose Fitting: Top 1 1/4 right - Bottom 1 1/4 left Number of Rows: 2 Material: ...
CSF OEM Replacement Radiator for 2006-2014 Mazda MX-5New
This radiator is a stock size replacement that is higher quality than the stock Mazda radiator. These radiators still have plastic endtanks like the stock Mazda radiator, with an aluminum core. Inc...
Fits: 2016 Mazda MX-5 with standard or Sport (Brembo) calipers. Use the drop down to configure your options. G-LOC is a new North Carolina based brake pad company who have taken their cumulative ...
G-LOC Brake Pads for 2001-2005 Mazda Miata SportNew
Fits: 2001-2005 Mazda Miata with sport brake package with larger brake rotors G-LOC is a new North Carolina based brake pad company who have taken their cumulative experience in racing brake pads...
Supertech Complete Valve Sets for 1994-2005 Mazda Miata 1.8LNew
Price is for an complete valve set of 8 intake and 8 exhaust valves. These kits are configured to our specs using Supertech valves. Please study the kits and the valve specs within the information ...
Supertech Complete Valve Sets for 1990-1993 Mazda Miata 1.6LNew
Price is for an complete valve set of 8 intake and 8 exhaust valves. These kits are configured to our specs using Supertech valves. Please study the kits and the valve specs within the information ...
Kit includes one radio delete plate and mounting hardware, and is designed to fit all 1999-2005 Mazda Miata dashboards with minor modifications as outlined in the instructions. Instruction Guide ...
5X Racing Ignition Coil Cover for 2001-2005 Mazda MiataNew
Kit is designed to create a clean, stylish, race-inspired cover for the unsightly coil-on-plug ignition system on 2001-2005 Mazda Miata's. Fits 2001-2005 Miatas Includes all hardware needed to in...
Includes two rear sway bar bushings and grease packet Designed as part of our 14mm Adjustable Rear Sway Bar kit , but will fit any 1990-2005 Mazda Miata 14mm Rear Sway Bar (including the OEM 2004...
Extended Lower Ball Joints for 1990-2005 Mazda MiataNew
NOW SCCA APPROVED! Kit Includes: two ball joints with new nuts and cotter pins for complete replacement of OEM lower ball joints Legal allowance for SCCA and NASA Spec Miata rules Add approxima...
Bosch LSU 4.9 5-wire, wide-band O2 sensor used in the Innovate Motorsports MTX-L wideband kits. Also compatible with the LM-2, LC-2, SCG-1, DLG-1, PSB-1, and PSN-1 NOTE: The latest generation wide...
Red Line Superlight ShockProof Gear Oil - 1 quartNew
Film thickness greater than an SAE 75W90, yet low fluid friction like ATF Used in low-power dog-ring racing transaxles with moderate to low load, qualifying, etc. Popular in British F3, Euro F3 an...
Original equipment for 1999-2000 JDM Roadster (Miata) & 2004-2005 Mazdaspeed Miata (Turbo) Direct bolt-in for US Market 1999-2000 Miata BP4W heads (will not fit 01-05 VVT engines due to the differe...
Wiseco specific piston rings include ONE pack of 3 rings for ONE piston (order a quantity of 4 for the whole engine) Included in kit: 1x 1.0mm top ring 1x 1.2mm 2nd ring 1x 2.8mm Oil Ring Inst...
Direct fit for 1990–1993 Mazda Miata Max temperature of 330°F Made of high grade silicone and heat-resistant embedded fibers Efficiently reduces heat Increases pressure tolerance OEM replacemen...
